Hi,
It seems the forks taper and get closer to the wheel near the top of the fork. These are not ideal forks for this wheel. Please have a look at this link
Two possible solutions are , new forks or a tube with a bent valve stem.
Have a look at this link
Normally the bent valve stem is installed in a way the valve comes out and bends away from the wheel. In this case the tube could be installed in a way the valve stem bends towards the wheel.
Gary
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article