EZkontrol Bluetooth BLDC Motor Controllers - Programming Guide

Hey, what’s up everybody, Abbas here from Golden Motor. Today I’m going to make a quick video on how to program your Easy Control motor controller. The great thing about this controller is that you don’t need a USB cable to program it—it’s completely Bluetooth-based. It works on both Apple and Android devices, but the process for each is slightly different. I’ll first walk you through the Apple setup, and then we’ll dive into the Android side.

For Apple users, the first step is to install the WeChat app. Once that’s installed, scan the QR code found on the Easy Control controller’s description page on our website (goldenmotor.bike). This QR code will lead you to the iOS-compatible app necessary to interface with the controller.

For Android users, the process is even simpler. Start by visiting our homepage at goldenmotor.bike. From there, navigate to the "Controllers" section and select any controller model—for example, the 72V controller we’re using for the go-kart in this video. Once you’ve selected your controller, scroll down the description section and look for the download link for the Android version of the app. The Android app is called Easy Tune. There’s no need for WeChat in this case—just download the Easy Tune APK directly.

Once the app is installed, open Easy Tune and connect it to your controller via Bluetooth. When prompted, enter the password—which is the last 11 digits printed on your controller’s label. After that, you're all set. You’ll be able to adjust parameters like throttle settings, acceleration, voltage levels, and more.