The SW 102 is a compact display designed for CYC motors, featuring an integrated pin pad. The power button is located on the top, with mode (M) and up/down buttons positioned for easy access. The display measures approximately 110 mm by 68 mm. It provides a clear black-and-white screen showing key information such as the current mode (Street or Race), assist level (ranging from zero to three levels), speedometer, and battery status with both a bar indicator and voltage reading.
Pressing the menu button cycles through additional statistics including trip distance, trip time, motor power, motor temperature, controller temperature, and heart rate monitoring (pending full setup). The display supports Bluetooth connectivity, enabling pairing with a smartphone app that offers extended settings and control.
Walk mode can be activated by holding down the down button; however, this function only operates when the assist level is above zero.
Two main menu systems are accessible on the display. The Trip Info menu, entered by holding the M button after the display has been on for more than 15 seconds, provides detailed trip statistics such as maximum and average speed, power output, calories burned, RPM, and efficiency metrics. The Main Settings menu, accessed by holding the M button within 15 seconds of powering on, allows configuration of essential parameters including riding mode (Street or Race), battery voltage according to cell count, wheel diameter, temperature units (Celsius or Fahrenheit), speed units (mph or km/h), auto-off timing to conserve battery, and password protection.
Battery configuration can be adjusted by changing the series cell count to match the battery type (e.g., from 10s/36V to 14s/52V). The display also allows resetting trip data via menu options.
The display pairs with the CYC Write Control mobile application, available for both iOS and Android platforms. This app replicates the display’s real-time data and provides advanced control over settings such as ride modes, assist levels, throttle behavior, pedal assist, and peripheral device configuration. The app supports dynamic tuning and optimization, enhancing user experience and performance management.
This overview summarizes the core features and operational guidance for the SW 102 display, suitable for users seeking to understand and configure their CYC motor display system effectively.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article