Wiring MP5 controller to MP4 motor

To wire an MP5 controller to a Magic Pie 4:

You can order an MP5 Vector controller and make sure to select the add-on that includes screws, a wire clip, spade plugs, and a 6-pin plug. https://goldenmotor.bike/product/magic-pie-5-vector-internal-controller-with-vector-plug/

Cut off the ends of the phase wires coming from the motor and attach spade plugs to them instead.

Remove the hall sensor plug coming from the motor and replace it with the 6-pin hall sensor plug for MP5 controllers.